What you have to do is to cut a piece (usually a circle, but other shapes work as well) of tinfoil, then wrap the cardboard with it and find a way to attach it to the device in such a way that it directs the signal towards the desired location. Basically, all you need is some tinfoil and cardboard (you can also use paper, but it's less reliable). To be honest, I've never been much into crafts, but this is a solution that won't cost you anything and although I don't think it will do you much good, it's worth trying out. If you need more help with this task, you can find detailed instructions here. The problem is that it's not as easy as it sounds and you will need to install firmware like the previously mentioned DD-WRT to be able to do it. This procedure might slightly reduce your Internet speed, but if the signal doesn't reach certain spots in your house it will extend the range to satisfy your needs. Another option is to install a program (it's actually firmware) called DD-WRT that can help you perform numerous tweaks to your WiFi device, including boosting the signal strength.ĭespite what other websites might tell you, in my experience, the only way this is worth the effort is if you use an older router (that you already own but don't use anymore) for the task. In theory you can raise this number up to 50 (max 70) mW, but read the router's technical specification before doing this as you could easily overheat it. There are two ways to do this: either by altering the number directly from the device's settings interface (The button should be named Transmit Power or something similar, and the number next to it should be measured in mW). OK, this is only for the advanced users you risk damaging your device, so if you have any doubts, don't try it. Once you're there, you should choose the 802.11n option as it offers a bigger range and a stronger signal than the alternatives (a / b / g). In case you're wondering, 802.11 is a family of specifications (protocols) for path sharing. In the same section as the option for switching channels, you should also find a button named 802.11g (the letter on the end may vary depending on your device). Modify the broadcast mode of your network.Moreover, you can use specialized software such as Acrylic Wi-Fi Free to get detailed information about the wireless connections in your vicinity, including the channels that they operate on (so that you know which ones to avoid). (For most routers, this option is available in the Access Point Settings section.). I would love to be more specific, but it's pretty hard to do that since there so many devices available on the market. Just go to your router's settings and select a different a channel (they're generally between 1 and 11) until you get an improvement. In order to avoid this, you should try switching the channel, but before you do, make sure that it is legal in your country. When there are multiple signals working on the same frequency, it is very likely that they will step on each other's toes. Your WiFi router/modem operates on a certain frequency. Now that you know the possible causes, let's go to the part where I tell you how to actually solve your WiFi troubles. If it does, than you've found your culprit, otherwise the problem is with your router/modem. Simply turn each of the devices off one at a time and check if your signal improves. However, if your WiFi signal is weak, there are a lot of things in your household that could be interfering with it: cordless phones, remote controls, microwaves, alarms, baby monitors, etc. This is a bit tricky, but it only affects the strength of your signal, so if you're getting a strong signal, you don't need to trouble yourself with this. In case moving the device is not an option, I'll show you in the later part of the article a few ways to work around the problem. The perfect placement of your modem/router can only be achieved through a trial-and-error process, but try to keep it as far as away from the neighbor's router as possible. The wall structure also influences the signal a lot, especially if the constructors encased some kind of metal in the construction of the walls. If you have a big house, try to place the device as close to the middle as possible. Your house and the placement of your router/modem can actually have a huge influence on the WiFi speed and signal strength. Even if you have a password, you should change it from time to time just in case. If you don't use any kind of security, you definitely should. Whenever you experience performance drops in the speed of your WiFi connection, there's always a chance that one of your neighbors has connected to your network. There are several common factors that can cause problems with your WiFi: your neighbors, the placement of your router/modem, or interference. Whenever you are dealing with an issue that you want to solve, you first have to search for its cause.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |